Skip to content
Tree House Jobs
All jobs

PUBLIC NOTICE - Airway Transportation Systems Specialist (G Band; ENV, RAD, NAV, AUT, COM and F Band: ENTRY)

Federal Aviation Administration · Canton, OH 44702 · Posted 10d ago

Full-timeOn-siteAviation
Pay
$69,552 – $82,976/yr
Schedule
Full-time
Closes
Jan 8, 2027

About the role

This position is an entry-level Airway Transportation Systems Specialist (ATSS). All duties of an ATSS are tied to maintaining safe and efficient operating capacity of the vast and complex network or electronics systems required for the world's largest air traffic control and navigation system. ATSS personnel install, evaluate, maintain, modify and certify facilities, services and equipment that support the National Airspace System (NAS). Responsibilities at the F band include, but not limited to the following: At this level, the ATSS performs basic, progressively more difficult assignments, receives academic and on-the-job instruction in fundamentals of the appropriate discipline, acquires and applies basic technical knowledge and limited experience to accomplish assignments. These responsibilities are associated with acquiring basic knowledge and hands-on experience leading to the ability to perform coordination, operation, repair, installation, maintenance, troubleshooting, modification, flight check, certification, and documentation activities on all or some of the discipline specific systems and services. Responsibilities at the G band include, but not limited to the following: At this level, the ATSS has a working knowledge and understanding of the impact of specific system performance in providing NAS-wide services and has full maintenance and operational responsibility for a single system or for the integration of multiple systems and services. Performs routine assignments independently, receiving little or no technical guidance. Utilizes and interprets FAA orders, technical manuals, manufacturer's instructions, procedures and other publications as required to complete multiple and complex work assignments. Applies practical judgment and discretion to select the most appropriate method to complete the work assignment. Supervisor furnishes general instructions on the scope of work, time limitations, and priorities. All ATSS should have a foundation of basic knowledge supplemented by work experience or formal education in order to perform in this position such as: knowledge of basic electronic and/or electrical theory; have the aptitude for solving mathematical problems (algebra and/or trigonometry to perform electronic/electrical calculations); read and interpret technical drawings; and apply basic physics theory. The developmental ATSS must use electronic test equipment required for maintenance, testing, troubleshooting, and repairing of NAS equipment/systems as well as use proper personal protective equipment and safety procedures while accomplishing work assignments. The ATSS's work out of offices located at or near airports and on service equipment located on airports, in Air Traffic Control Towers (ATCT), Air Route Traffic Control Centers (ARTCC's), and other remote facilities. In some cases, they may have work assignments located in open fields, on towers and on remote mountain tops or offshore. Candidates must be able to efficiently perform the essential functions of the position without hazard to themselves or others. The ATSS may be required to lift and/or carry objects weighing up to 50 pounds; climb stairs/ladders up to 100 feet; to bend or stoop for extended periods; work in diverse environmental conditions (outside/extreme weather); work rotating shifts, weekends and/or holidays; possess a valid driver's license, and possibly travel away from home up to 75% of the time. Visual acuity (including color and near), hearing acuity, and clear and effective speech communication may be required for safety related duties. Newly hired ATSS's may spend a significant amount of time attending formal training at the FAA Academy in Oklahoma City, OK.

What we are looking for

Group Coverage Standard for Administrative and Management Positions in conjunction with the Individual Occupational Requirements for DOT/FAA Airway Transportation Systems Specialist, FV-2101. QUALIFICATIONS AT THE FV-F LEVEL BASED ON WORK EXPERIENCE: To be QUALIFIED: Applicants must document 3 years of full time (40 hours per week) general work experience that provided a basic knowledge of the principles of electronics, mathematics, computers, aeronautics, or related areas, or an understanding, both theoretical and practical, of automated systems operation, integration, management, and maintenance. Experience may have been gained in occupations such as computer specialist, electronics technician, telecommunications specialist, engineer, or other work related to this position. To be WELL QUALIFIED: Applicant must document 1 year of full time (40 hours per week) more specialized work experience that provided the opportunity to acquire and the need to apply practical and theoretical knowledge of the principles, functions, and processes associated with electronics and electricity concepts; computer systems and information management concepts; telecommunications concepts; and system management and integration methods related to the ATSS discipline specific systems and services. Applicants should include examples and detailed work experience in their resume. QUALIFICATIONS AT THE FV-F LEVEL BASED ON EDUCATION: To be QUALIFIED: Applicants must document a 4-year course of study or at least 24 semester hours leading to a bachelor's degree in one of these fields: computer science, mathematics, electronics, physical sciences, information management, engineering, telecommunications, or other fields related to this position. Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. QUALIFICATIONS AT THE FV-F LEVEL BASED ON A COMBINATION OF EXPERIENCE AND EDUCATION: Equivalent combinations of education and experience may be qualifying for this position. The total percentage must equal at least 100% to qualify. QUALIFICATIONS AT THE FV-G LEVEL BASED ON EXPERIENCE: To be QUALIFIED: Applicants must document 1 year of specialized work experience, equivalent to at least the next lower level, that demonstrates an extensive knowledge of basic electricity and electronic theory; knowledge and ability to use tools, materials, and various types of specialized test equipment for the maintenance, troubleshooting and repairing of COMMUNICATIONS, NAVIGATIONAL AIDS, AUTOMATION, RADAR, AND ENVIROMENTAL SYSTEMS such as: Software Programmer, Boiler Repair, Power Distribution Systems, Satellite Communications, Fire Control, TACAN airborne equipment, GPS repair, Home Based Hardware installations, Civil Engineering, other airborne equipment, and other similar equipment and systems. To be WELL-QUALIFIED: Applicants must document 1 year of specialized work experience with extensive knowledge and skill in the repair, installation, analysis, maintenance, troubleshooting, modification, and certification on COMMUNICATIONS, NAVIGATIONAL AIDS, AUTOMATION, RADAR, AND ENVIROMENTAL SYSTEMS such as: Industrial HVAC, Radio Controlled Equipment, Hardware Configuration, Sonar, TACAN ground equipment, Commercial/Industrial CPU Servicing, Instrument Landing Systems, Surface Search Radar, IFF, other ground-based equipment, and other similar equipment and systems. Applicants should include examples and detailed work experience in their resume. QUALIFICATIONS AT THE FV-G LEVEL BASED ON EDUCATION:…

Similar openings

  • FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlan… This is a summary. Read the full posting and apply on the employer's site.

    See the postingvia AdzunaInstallation / Maintenance / Repair2d ago
  • AIRPLANE FLIGHT INSTRUCTOR

    Air National Guard Units · Springfield, Ohio

    This National Guard position is for a AIRPLANE FLIGHT INSTRUCTOR, Position Description Number D2044P01 and is part of the 178 OG, Ohio Air National Guard. The primary purpose of this position is to both personally pilot and to instruct others in the piloting of highly advanced military Remotely Piloted Aircraft (RPA). As a AIRPLANE FLIGHT INSTRUCTOR, GS-2181-13, you will perform the following duties: 1. Administers combat flight training to military aircrews. Instructs and evaluates pilots through a broad training spectrum, in addition to performing pilot duties.a. Initial Qualification Training (IQT): Training to qualify the aircrew in basic aircraft flying duties without specific regard to a unit operational mission. It is the minimum training requirement for Basic Aircraft Qualification (BAQ). Elements of instruction include: Basic and Advanced Handling Characteristics (throughout the full spectrum of the flight envelope), Instrument Flight, Instrument and Visual Traffic Patterns, Airborne Emergency Procedures and Patterns, Line of Sight (LOS C-Band) Fundamentals, KU Band Datalink Fundamentals, and Lost Link Logic/Profiles.b. Mission Qualification Training (MQT): Training required to achieve a basic level of competence in the unit's primary tasked missions. This training is a prerequisite for Basic Mission Capable (BMC) and Combat Mission Ready (CMR) status. Elements of instruction include, but are not limited to: Precision Strike; Close Air Support (CAS); Intelligence, Surveillance, and Reconnaissance (ISR); Combat Search and Rescue (CSAR); Time Sensitive Targeting (TST); Armed Escort; and Killer Scout.c. Continuation Training (CT): Training to maintain proficiency and improve aircrew capabilities to perform unit missions and aircrew proficiency sorties not flown in formal syllabus missions, tests, or evaluations. It is applicable to CMR and BMC aircrew. CT is directed by the units' specific Ready Aircrew Program (RAP) tasking which is received from the Major Command (MAJCOM). CT is measured in number and types of sorties and events accomplished. All types of training mentioned in this section pertain to Readiness Aircrew Program (RAP) tasked training.d. Upgrade Training (UG): Training which is syllabus directed to qualify the aircrew in positions beyond that of the entry level. Elements of "Upgrade Training" include, but are not limited to: Instructor Pilot (IP), Flight Examiner (FE), Launch and Recovery Element (LRE) pilot, Mission Commander, and Functional Check Flight (FCF) pilot upgrades.e. Special Capability Training: Training which is designed for specific missions and/or special equipment types. Elements of "Special Capability" instruction include (but are not limited to): Forward Air Controller-Airborne (FAC-A), Multi-Aircraft Control (MAC), and Multi-Ship/Formation Operations. 2. Assesses instructors, CMR and BMC pilots, CMR and BMC Sensor Operators (SOs), and Mission Coordinators (MCs) both assigned and attached to the unit. Assesses newly acquired pilots, SOs, and MCs to determine capabilities/proficiency in the RPA, and train them to effectively employ in a combat mission. Plans, develops, and presents comprehensive academic courses of instruction for both ground and flight training to assist aircrew in maintaining Mission Ready (MR) status. Performs as instructor, and/or flight examiner for ground training which consists of classroom academics and/or aircrew training device (ATD) (simulator) training. Performs as an IP, and/or FE to continually examine rated aircrew to assure training standards are met in the following areas: mission planning, briefing, ground operations, takeoff and landings, in-flight control, cockpit resource management, mission execution, and debriefing. Ensures RPA aircrew gain and maintain the skills necessary to deploy and conduct worldwide operations that provide direct combat support to Combatant Commanders (COCOMs) to include all previously listed mission sets. Develops, validates, and instructs new Tactics, Techniques, and Procedures (TTPs), and trains all aircrew on new and emerging combat capabilities of the RPA. Determines progress and proficiency levels of all aircrew; provides re-qualification evaluations and directs/provides specialized remedial or additional training as necessary. Evaluates formal training directives, and develops/recommends course changes, new material, new training systems and methods.Performs other duties as assigned. *The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2044P01). https://acpol2.army.mil/fasclass/search_fs/search_fasclass.asp

    $162,290 – $210,979/yrvia USAJOBSAviation2d ago
  • AIRCRAFT MECHANIC

    Headquarters, Air Force Reserve Command · Youngstown, Ohio

    This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain their active membership in the AF Reserve unit where assigned. ARTs receive on average one weekend of military training per month. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is: To serve as an Air Reserve Technician (ART) performing such duties as removing, installing, adjusting, aligning, inspecting, troubleshooting, and performing final functional and operational tests on a variety of major aircraft systems, their assemblies, and components such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic, and flight control systems and to provide training to reservists in the accomplishment of tasks set forth herein. DUTIES: 1. Performs inspection and troubleshooting on a variety of aircraft systems, their assemblies, and components in accordance with applicable technical orders/commercial manuals (C40 only) and specifications. 2. Positions, maintains, disassembles, repairs, and reassembles aircraft systems, their assemblies, and components in accordance with applicable technical orders and specifications. 3. Accomplishes aircraft maintenance and equipment record keeping, both manual and automated, associated with aircraft maintenance and repair. 4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. 5. Verifies and certifies work processes and procedures and adequacy of work accomplished by certified co-workers and trainees.

    $55,682 – $82,479/yrvia USAJOBSAviation3d ago