Skip to content
Tree House Jobs
All jobs

Aviation Safety Inspector (General Aviation Maintenance) (Principal Maintenance Inspector)

Federal Aviation Administration · Westlake, OH 44145 · Posted 14d ago

Full-timeOn-siteAviation
Pay
$107,446 – $139,684/yr
Schedule
Full-time
Closes
Nov 26, 2026

About the role

The Principal Maintenance Inspector (PMI) is responsible for applying substantial knowledge of and experience with Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for Federal Aviation Administration (FAA) field personnel and the public governing all matters to general aviation maintenance safety issues. The PMI receives administrative direction from management in terms of broadly defined missions or functions. The PMI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The PMI provides policy assistance to field level Aviation Safety Inspectors (ASIs) on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled. Some FG-14 assignments involve service wide responsibility for application of expert knowledge of flight operations for advanced multiengine turbojet aircraft. Such employees are concerned with all aspects of the operational capabilities and limitations of the aircraft. Aviation Safety Inspectors (ASIs) at the FG-14 level establish technical procedures and performance indexes and review complete flight operations programs for leaders in the aviation industry, or organizations of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity. The following assignments are illustrative: 1. As a Service wide expert on a particular type of advanced multiengine turbojet aircraft: Advises other inspectors of major changes in the operation of the aircraft. Standardizes procedures and judgments used by inspectors to evaluate the operation of the aircraft. Evaluates new training methods and equipment (e.g., simulators) for initial certification. Serves on national boards that determine the minimum equipment necessary to operate a particular type of aircraft safely. Serves on boards that evaluate incidents, accidents, complaints, and other serious problems relating to the aircraft. Develops plans to resolve problems. 2. As the principal representative in regulatory oversight of general aviation and air carrier activities, exercises certificate authority over extensive and complex operations. Analyzes flight operations involving large fleets of turbojet aircraft engaged in passenger and freight service. (By comparison, FG-13 employees exercise certificate authority over less complex operations or perform major portions of the certification, inspection, and surveillance under the direction of FG-14 inspectors.) 3. Exercises certificate authority and safety responsibility over a complex of broad and varied general aviation organizations such as air carriers, executive and/or industrial operators, designees, and flight schools when the activities monitored equate collectively to a major air carrier in terms of size and complexity of aircraft fleet employed, scope and technical complexity of operations, management sophistication, industry leadership, and public impact. The magnitude, intensity, and scope of program responsibility are typically such as to require significant and regular assistance of lower graded inspectors. FG-14 employees develop and evaluate flight operations programs for organizations which utilize the newest, most complex aircraft, systems, and equipment. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy- setting level. The PMI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs. Performs other duties as required.

What we are looking for

Reference the U.S. Office of Personnel Management (OMP) Individual Occupational Requirements for Aviation Safety Series (1825) General Requirements for All 1825 Positions: Not more than two separate incidents involving Federal Aviation regulations violations in the last 5 years Valid State driver's license Fluency in the English language No chemical dependencies or drug abuse that could interfere with job performance, and High School diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation. The minimum medical requirements include the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. To qualify for this position, you must meet the Office of Personnel Management Qualification Standards for the 1825 series in the General Aviation Maintenance specialty which requires the following: Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. Certificate and Ratings: This position requires a certificate and ratings for minimum qualification in the following specialty: General Aviation Maintenance. A copy of the certificate and ratings are required for ALL candidates newly appointed to the FAA in the 1825 specialty of General Aviation Maintenance. Therefore, applicants must submit a copy of their certificate and ratings unless they are currently occupying (or previously held) General Aviation (Maintenance) 1825 Series Position. Specialized Experience: To qualify for this position, you must demonstrate in your application that you possess at least one year (52 weeks) of specialized experience equivalent to the (FG/GS-13) level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position and is typically in or related to the work of the position to be filled. Specialized Experience includes: evaluating complex aircraft maintenance programs, systems, and procedures to ensure compliance with Federal Aviation Regulations and established safety standards; conducting regulatory surveillance, inspections, and investigations of aviation maintenance operations to identify safety deficiencies, determine compliance, and recommend corrective action; and analyzing and resolving complex or unusual aviation maintenance problems involving aircraft systems, operational procedures, regulatory compliance, and public safety. For Lateral Movements Between 1825 Specialties: To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors.…

Similar openings

  • FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlan… This is a summary. Read the full posting and apply on the employer's site.

    See the postingvia AdzunaInstallation / Maintenance / Repair2d ago
  • AIRPLANE FLIGHT INSTRUCTOR

    Air National Guard Units · Springfield, Ohio

    This National Guard position is for a AIRPLANE FLIGHT INSTRUCTOR, Position Description Number D2044P01 and is part of the 178 OG, Ohio Air National Guard. The primary purpose of this position is to both personally pilot and to instruct others in the piloting of highly advanced military Remotely Piloted Aircraft (RPA). As a AIRPLANE FLIGHT INSTRUCTOR, GS-2181-13, you will perform the following duties: 1. Administers combat flight training to military aircrews. Instructs and evaluates pilots through a broad training spectrum, in addition to performing pilot duties.a. Initial Qualification Training (IQT): Training to qualify the aircrew in basic aircraft flying duties without specific regard to a unit operational mission. It is the minimum training requirement for Basic Aircraft Qualification (BAQ). Elements of instruction include: Basic and Advanced Handling Characteristics (throughout the full spectrum of the flight envelope), Instrument Flight, Instrument and Visual Traffic Patterns, Airborne Emergency Procedures and Patterns, Line of Sight (LOS C-Band) Fundamentals, KU Band Datalink Fundamentals, and Lost Link Logic/Profiles.b. Mission Qualification Training (MQT): Training required to achieve a basic level of competence in the unit's primary tasked missions. This training is a prerequisite for Basic Mission Capable (BMC) and Combat Mission Ready (CMR) status. Elements of instruction include, but are not limited to: Precision Strike; Close Air Support (CAS); Intelligence, Surveillance, and Reconnaissance (ISR); Combat Search and Rescue (CSAR); Time Sensitive Targeting (TST); Armed Escort; and Killer Scout.c. Continuation Training (CT): Training to maintain proficiency and improve aircrew capabilities to perform unit missions and aircrew proficiency sorties not flown in formal syllabus missions, tests, or evaluations. It is applicable to CMR and BMC aircrew. CT is directed by the units' specific Ready Aircrew Program (RAP) tasking which is received from the Major Command (MAJCOM). CT is measured in number and types of sorties and events accomplished. All types of training mentioned in this section pertain to Readiness Aircrew Program (RAP) tasked training.d. Upgrade Training (UG): Training which is syllabus directed to qualify the aircrew in positions beyond that of the entry level. Elements of "Upgrade Training" include, but are not limited to: Instructor Pilot (IP), Flight Examiner (FE), Launch and Recovery Element (LRE) pilot, Mission Commander, and Functional Check Flight (FCF) pilot upgrades.e. Special Capability Training: Training which is designed for specific missions and/or special equipment types. Elements of "Special Capability" instruction include (but are not limited to): Forward Air Controller-Airborne (FAC-A), Multi-Aircraft Control (MAC), and Multi-Ship/Formation Operations. 2. Assesses instructors, CMR and BMC pilots, CMR and BMC Sensor Operators (SOs), and Mission Coordinators (MCs) both assigned and attached to the unit. Assesses newly acquired pilots, SOs, and MCs to determine capabilities/proficiency in the RPA, and train them to effectively employ in a combat mission. Plans, develops, and presents comprehensive academic courses of instruction for both ground and flight training to assist aircrew in maintaining Mission Ready (MR) status. Performs as instructor, and/or flight examiner for ground training which consists of classroom academics and/or aircrew training device (ATD) (simulator) training. Performs as an IP, and/or FE to continually examine rated aircrew to assure training standards are met in the following areas: mission planning, briefing, ground operations, takeoff and landings, in-flight control, cockpit resource management, mission execution, and debriefing. Ensures RPA aircrew gain and maintain the skills necessary to deploy and conduct worldwide operations that provide direct combat support to Combatant Commanders (COCOMs) to include all previously listed mission sets. Develops, validates, and instructs new Tactics, Techniques, and Procedures (TTPs), and trains all aircrew on new and emerging combat capabilities of the RPA. Determines progress and proficiency levels of all aircrew; provides re-qualification evaluations and directs/provides specialized remedial or additional training as necessary. Evaluates formal training directives, and develops/recommends course changes, new material, new training systems and methods.Performs other duties as assigned. *The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2044P01). https://acpol2.army.mil/fasclass/search_fs/search_fasclass.asp

    $162,290 – $210,979/yrvia USAJOBSAviation2d ago
  • AIRCRAFT MECHANIC

    Headquarters, Air Force Reserve Command · Youngstown, Ohio

    This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain their active membership in the AF Reserve unit where assigned. ARTs receive on average one weekend of military training per month. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is: To serve as an Air Reserve Technician (ART) performing such duties as removing, installing, adjusting, aligning, inspecting, troubleshooting, and performing final functional and operational tests on a variety of major aircraft systems, their assemblies, and components such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic, and flight control systems and to provide training to reservists in the accomplishment of tasks set forth herein. DUTIES: 1. Performs inspection and troubleshooting on a variety of aircraft systems, their assemblies, and components in accordance with applicable technical orders/commercial manuals (C40 only) and specifications. 2. Positions, maintains, disassembles, repairs, and reassembles aircraft systems, their assemblies, and components in accordance with applicable technical orders and specifications. 3. Accomplishes aircraft maintenance and equipment record keeping, both manual and automated, associated with aircraft maintenance and repair. 4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. 5. Verifies and certifies work processes and procedures and adequacy of work accomplished by certified co-workers and trainees.

    $55,682 – $82,479/yrvia USAJOBSAviation3d ago