Skip to content
Tree House Jobs
All jobs

Aviation Safety Inspector (Airworthiness), Air Carrier Maintenance

Federal Aviation Administration · Westlake, OH 44145 · Posted 15d ago

Full-timeOn-siteAviation
Pay
$107,446 – $139,684/yr
Schedule
Full-time
Closes
Nov 25, 2026

About the role

This position is assigned to the Flight Standards Service and serves as an international Aviation Safety Inspector responsible for supporting, developing and managing the International Program Division responsibilities regarding the monitoring of foreign air carriers. May involve managing a specific program(s) within the branch and requests under 14 CFR parts 129 and 375, policy development, and Flight Standards Inspector guidance. Serves as Flight Standards technical expert with responsibility for the planning, development, standardization, evaluation and effectiveness of operational policies, including advisory circulars, inspector guidelines, and training standards, and other applicable standards in support of assigned programs. Analyzes and evaluates the effectiveness of division policy in assigned program areas. Participates in national and international working groups and panels with other organization elements of the agency, or other government agencies, International Civil Aviation Organization (ICAO) and industry representatives for the purpose of resolving complex and controversial problems having a direct influence on the safety of assigned technical programs. Assists and advises division management and other Flight Standards management in developing and presenting background and justification on proposals, which require headquarters decision, or coordination with other Federal Aviation Administration (FAA) lines of business, Department of Transportation (DOT), Department of State (DOS), Department of Defense (DOD), other interested agencies, ICAO, or foreign governments. The incumbent is responsible for reviewing and evaluating, on a continuing basis, established rules and regulations related to assigned technical programs. Evaluates regulatory petitions or proposals from within or outside the agency, and recommends the development of new or amended rules, regulations, or other regulatory material, and the discontinuance of rules and regulations. Responsible for the preparation of Federal Register notices regarding assigned technical programs for original petitions for exemptions, and coordinates with other Aviation Safety and Flight Standards Organizations to develop a complete analysis and appropriate response. The inspector often engages with internal and external stakeholders to promote safety, understanding, and compliance related to assigned programs. May represent the agency as a technical trainer/instructor delivering formal training for assigned technical programs. May serve as a course mentor for formal training courses within assigned technical programs. Performs other duties as assigned.

What we are looking for

OPM Qualification Standard for the Aviation Safety Inspector Air Carrier Maintenance specialty (from the Operating Manual for Qualification Standards for General Schedule Positions) is located at: http://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1800/aviation-safety-series-1825/ General Requirements for All Positions: Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; Valid State driver's license; Fluency in the English language; No chemical dependencies or drug abuse that could interfere with job performance; and High school diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner and must meet all of the following requirements. Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. In addition, applicants for positions that require participation in the operation of the aircraft must: Possess a valid second-class medical certificate in accordance with FAA regulations; and Pass recurrent medical examinations as prescribed by the FAA. Applicants not requiring valid second-class medical certificates who are tentatively selected will be required to: Provide documentation from a board-certified physician certifying that they meet the minimal medical requirements; or Individuals who do not meet the minimum medical requirements but who are otherwise qualified will receive an individualized assessment to determine whether they can perform the essential functions of the position. Specialized Experience: When the predominant work involves air carrier maintenance, applicants for Aviation Safety Inspector (Air Carrier Maintenance) positions must meet all of the following requirements. 1. Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program. 2. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state, or Federal governmental agency. 3. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. 4. Aircraft maintenance work experience within the last 3 years. 5. FAA Mechanic Certificate with airframe and power plant ratings. To qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS-13 level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.…

Similar openings

  • FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlan… This is a summary. Read the full posting and apply on the employer's site.

    See the postingvia AdzunaInstallation / Maintenance / Repair2d ago
  • AIRPLANE FLIGHT INSTRUCTOR

    Air National Guard Units · Springfield, Ohio

    This National Guard position is for a AIRPLANE FLIGHT INSTRUCTOR, Position Description Number D2044P01 and is part of the 178 OG, Ohio Air National Guard. The primary purpose of this position is to both personally pilot and to instruct others in the piloting of highly advanced military Remotely Piloted Aircraft (RPA). As a AIRPLANE FLIGHT INSTRUCTOR, GS-2181-13, you will perform the following duties: 1. Administers combat flight training to military aircrews. Instructs and evaluates pilots through a broad training spectrum, in addition to performing pilot duties.a. Initial Qualification Training (IQT): Training to qualify the aircrew in basic aircraft flying duties without specific regard to a unit operational mission. It is the minimum training requirement for Basic Aircraft Qualification (BAQ). Elements of instruction include: Basic and Advanced Handling Characteristics (throughout the full spectrum of the flight envelope), Instrument Flight, Instrument and Visual Traffic Patterns, Airborne Emergency Procedures and Patterns, Line of Sight (LOS C-Band) Fundamentals, KU Band Datalink Fundamentals, and Lost Link Logic/Profiles.b. Mission Qualification Training (MQT): Training required to achieve a basic level of competence in the unit's primary tasked missions. This training is a prerequisite for Basic Mission Capable (BMC) and Combat Mission Ready (CMR) status. Elements of instruction include, but are not limited to: Precision Strike; Close Air Support (CAS); Intelligence, Surveillance, and Reconnaissance (ISR); Combat Search and Rescue (CSAR); Time Sensitive Targeting (TST); Armed Escort; and Killer Scout.c. Continuation Training (CT): Training to maintain proficiency and improve aircrew capabilities to perform unit missions and aircrew proficiency sorties not flown in formal syllabus missions, tests, or evaluations. It is applicable to CMR and BMC aircrew. CT is directed by the units' specific Ready Aircrew Program (RAP) tasking which is received from the Major Command (MAJCOM). CT is measured in number and types of sorties and events accomplished. All types of training mentioned in this section pertain to Readiness Aircrew Program (RAP) tasked training.d. Upgrade Training (UG): Training which is syllabus directed to qualify the aircrew in positions beyond that of the entry level. Elements of "Upgrade Training" include, but are not limited to: Instructor Pilot (IP), Flight Examiner (FE), Launch and Recovery Element (LRE) pilot, Mission Commander, and Functional Check Flight (FCF) pilot upgrades.e. Special Capability Training: Training which is designed for specific missions and/or special equipment types. Elements of "Special Capability" instruction include (but are not limited to): Forward Air Controller-Airborne (FAC-A), Multi-Aircraft Control (MAC), and Multi-Ship/Formation Operations. 2. Assesses instructors, CMR and BMC pilots, CMR and BMC Sensor Operators (SOs), and Mission Coordinators (MCs) both assigned and attached to the unit. Assesses newly acquired pilots, SOs, and MCs to determine capabilities/proficiency in the RPA, and train them to effectively employ in a combat mission. Plans, develops, and presents comprehensive academic courses of instruction for both ground and flight training to assist aircrew in maintaining Mission Ready (MR) status. Performs as instructor, and/or flight examiner for ground training which consists of classroom academics and/or aircrew training device (ATD) (simulator) training. Performs as an IP, and/or FE to continually examine rated aircrew to assure training standards are met in the following areas: mission planning, briefing, ground operations, takeoff and landings, in-flight control, cockpit resource management, mission execution, and debriefing. Ensures RPA aircrew gain and maintain the skills necessary to deploy and conduct worldwide operations that provide direct combat support to Combatant Commanders (COCOMs) to include all previously listed mission sets. Develops, validates, and instructs new Tactics, Techniques, and Procedures (TTPs), and trains all aircrew on new and emerging combat capabilities of the RPA. Determines progress and proficiency levels of all aircrew; provides re-qualification evaluations and directs/provides specialized remedial or additional training as necessary. Evaluates formal training directives, and develops/recommends course changes, new material, new training systems and methods.Performs other duties as assigned. *The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2044P01). https://acpol2.army.mil/fasclass/search_fs/search_fasclass.asp

    $162,290 – $210,979/yrvia USAJOBSAviation2d ago
  • AIRCRAFT MECHANIC

    Headquarters, Air Force Reserve Command · Youngstown, Ohio

    This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain their active membership in the AF Reserve unit where assigned. ARTs receive on average one weekend of military training per month. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is: To serve as an Air Reserve Technician (ART) performing such duties as removing, installing, adjusting, aligning, inspecting, troubleshooting, and performing final functional and operational tests on a variety of major aircraft systems, their assemblies, and components such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic, and flight control systems and to provide training to reservists in the accomplishment of tasks set forth herein. DUTIES: 1. Performs inspection and troubleshooting on a variety of aircraft systems, their assemblies, and components in accordance with applicable technical orders/commercial manuals (C40 only) and specifications. 2. Positions, maintains, disassembles, repairs, and reassembles aircraft systems, their assemblies, and components in accordance with applicable technical orders and specifications. 3. Accomplishes aircraft maintenance and equipment record keeping, both manual and automated, associated with aircraft maintenance and repair. 4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. 5. Verifies and certifies work processes and procedures and adequacy of work accomplished by certified co-workers and trainees.

    $55,682 – $82,479/yrvia USAJOBSAviation3d ago